• Direct drive structure means no belts, no rotary encoders, no gears, no wear, higher acceleration, higher cutting speed, and increased accuracy.
• Fiber laser is equipped with an optical isolator to stop reflections
• High-quality fiber laser power – up to 5000 Watts!
• 12″ clearance under the cutting head with 2″ of Z-travel.
• Purged gas: compressed air or Nitrogen (N2) protects the cutting head optics
• Sealed, high-quality linear bearings lubricated for life
• Software aligns the perpendicularity of the X and Y axes

• • Fiber Optic Beam Delivery System
  • Access From The Front And Back
  • Simple Operation Panel
  • Auto Focus Cutting Head
  • Replaceable Nesting Basket
  • Native G-Code Cnc Programming
  • Standard Cnc Control
  • 4’ X 4’ Standard Cutting Table Size
  • With Optional 4’ Extension Table Extends Cutting Area To 4’ X 8’.
  • 1000 Watt Fiber Laser
  • Available Custom Systems With Up To 50,000 Watt Fiber Laser
  • Software Controlled X Y Orthogonality
  • High Pressure Gas Assist N2, Argon Or O2 Gas-Assisted
  • Cutting Under Pressures Of Up To 250 Psi.
  • Class 1 And Class 4 Laser Safety Enclosures
  • Processes Most Commonly Used Materials For 1064 Nm Laser Wavelength.
  • Highest Cutting Quality Available From 1.06 Mkm Lasers
  • Latest Generation Ytterbium Fiber Laser With Up To 5.000 Watt Cw
  • Fastest Cutting Speed On The Market For Comparable Systems
  • No Optical System Alignment, No Laser Service Necessary
  • Low Power Consumption, No Need For High Power Outlet
  • Software Alignment On Orthogonality
  • No Laser Service Knowledge Required From The Operator
  • No Alignment After Optics Replacement
  • No Beam Delivery System Maintenance
  • Lowest Operating Cost Among All Laser Types
  • No Replacement Parts On Laser Necessary
  • Save Valuable Work And Floor Space, The Unit Has A Small Footprint, Is Ethernet
  • Ready And Plug- &-Play Capable.
  • Ease Of Installation Allows For Quick Start-Up
  • Fully Software Controlled Mechanical Geometry Alignment Eliminating Special
  • Requirements For Installation
  • No Re-Education Required For Experienced Cnc Operators

• • Cutting highly reflective metals & materials
  • High-speed sheet metal cutting
  • Automotive frames cutting
  • Coated & Plated Metals
  • Anodized Aluminum
  • Mild Steel
  • Stainless Steel
  • Anodized Aluminum
  • Aluminum
  • Copper
  • Non Clear Plastics
  • Different Alloys
  • Coated And Plated Metals
  • Thick Coating Removal
  • Deep Engraving
  • Stencils & Masks
  • Vector And Bit Map
  • Leather
  • Dieboards
  • Shipbuilding
  • Signmaking
  • Control Panels
  • Plaques & Awards

• Standard programmable Z-axis: With 1.5’ (38 mm) stroke suitable for 3D machining.
• Replaceable 48″ x 48″ x 6″ nesting basket for different support surfaces: aluminum grating, honeycomb, and vacuum holding tables
• The latest generation of motion controllers integrate laser control functions, provide the fastest processing speeds, and optimize trajectory
• Maximum material size- 4′ x 4′ (1250 x 1250 mm)
• Material Thickness – See our Application Page
• Cutting Speed – Max. 1000mm/sec, 5000mm/s² acceleration
• Accuracy – +/- 0.020 mm
• High-pressure cutting nozzle with Oxygen (O2) or Nitrogen (N2) assisted gas for high-speed, clean cutting.
• System equipped with high-pressure oxygen laser cutting head for high-speed cutting of mild and stainless steel.
• The same system can also do marking and engraving on a variety of materials.

SMB1200 Brochure